Extract 825 is a pneumatically operated retractable probe housing to be attached on process tanks or tubing by welding sockets DN25. The drive unit inserts the sensor into the process medium and back into the cleaning chamber. When reaching the final position of the “measuring” or “service” position a pneumatic position signal responds automatically. Cleaning, rinsing and calibration of the sensor is possible while the process is running. An intergrated PTFE scraper allows the use also in rougher processes.
Datasheet Technical Information
| Process pressure: | 0…10 bar |
| Process temperature: | -10…140 °C |
| Ambient temperature: | -10…70 °C |
| Immersion length: | 70 mm |
| O-ring position: | 25 mm |
| Sensors: | 225mm Ø12 PG 13.5 |
| Materials: | PP, PVDF, PEEK |
| Sealings: | EPDM, FPM (Viton), FFKM (Kalrez) |
| Process connection: | G1 1/4" (DN25) |
| Cleaning ports: | G1/8", G1/4", FNPT1/4" |
| Operating power: | compressed air 4..6 bar |
| Limit switches: | pneumatically / electrically, integrated |
Here you will find external content from Vimeo. You can display it with one click.
Show external contentAdvantages of automated pH measuring points
Here you will find external content from Vimeo. You can display it with one click.
Show external contentCommissioning of the electro-pneumatic cleaning control unit EXmatic 471
Here you will find external content from Vimeo. You can display it with one click.
Show external contentRetractable probe housing EXtract - easy and effective
Here you will find external content from Vimeo. You can display it with one click.
Show external contentCommissioning of the electro-pneumatic cleaning control unit EXmatic 470
We are looking forward to hearing from you:
Exner Process Equipment GmbH
Carl-Metz-Straße 26
76275 Ettlingen
Deutschland
Telefon: +49 (0)7243-94 54 29-0
Fax: +49 (0)7243-94 54 29-99
E-Mail: sales@e-p-e.de
