EXdip 910

DN50 / ANSI 2" stainless steel

EXdip 910 is an immersion fitting made of stainless steel with flanged connection and integrated orbital sensor cleaning system for nominal diameter DN50 / 2”. The probe housing is firmly screwed by a flange connection.The built-in sensor is accommodated securely in a protective cage. Directly in the range of the sensor the highly effective orbital cleaning flushing ensures a mechanical cleaning of the sensor. The immersion fitting is available in various lengths.

Datasheet

Your advantages

  • Robust design
  • Integrated orbital sensor cleaning system
  • Extension of sensor-lifetime and reduction of maintenance efforts
  • Easy installation and removal of the sensor holder
  • Stainless steel AISI 316L / 1.4404
  • Immersion length 500-2500mm
  • Minimum size DN50 / 2”
  • Up to 10 bar and 140 °C
  • No external cleaning devices necessary

Configuration

Request quote

Specifications

Process pressure: 0...10 bar
Process temperature: -10...140 °C
Material: 1.4404 / AISI 316L
Sealing material: EPDM or FPM (Viton)
Immersion lengths: 0.5 up to 2.5 meters
Flange sizes: DIN DN50 / ANSI 2"
Sensor cleaning: integrated orbital spray cleaning (option)
Certificates: material

Dimensions

Applications

  • For all kind of Ø12/120mm sensors with thread PG13.5 (pHglass- and ISFET sensors, conductivity- or temperature sensors, turbidity and other optical sensors)
  • Chemicals
  • Water and wastewater
  • Permanent installation in tanks, vessels or open channels

Our Probe Housings

Immersion fittings
EXdip 910EXdip 920
Control units for pneumatic retractable housings
EXmatic 470
Control units - accessories
EXconnect 170
Flow-through fittings
EXflow 710EXflow 720