EXtract 825
plastic for welding socket DN25
Extract 825 is a pneumatically operated retractable probe housing to be attached on process tanks or tubing by welding sockets DN25. The drive unit inserts the sensor into the process medium and back into the cleaning chamber. When reaching the final position of the “measuring” or “service” position a pneumatic position signal responds automatically. Cleaning, rinsing and calibration of the sensor is possible while the process is running. An intergrated PTFE scraper allows the use also in rougher processes.
Your advantages
- Robust design, integrated PTFE scraper
- Usable for DN25 welding socket
- Extension of sensor-lifetime and reducing of maintenance efforts
- Automatic safety lock while sensor is removed
- Usable in ATEX-areas
- Immersion length 70mm
- Up to 10 bar and 140 °C
- PP / PVDF or PEEK
- Can be fully automated with pneumatic or electropneumatic control units (e.g. EXmatic 450 or EXmatic 460)
- Drive unit free of maintenance
Configuration
-
Specifications
Process pressure 0…10 bar Process temperature -10…140°C Ambient temperature -10…70°C Immersion length 70mm O-ring position 25mm Sensors Ø12-225mm PG 13.5 Materials PP, PVDF, PEEK Sealings EPDM, FPM (Viton), FFKM (Kalrez) Process connection G1 1/4" (DN25) Cleaning ports G1/8", G1/4", FNPT 1/4" Operating power compressed air 4..6 bar Limit switches pneumatic, integrated -
Dimensions
-
Applications
- For all kind of Ø12-225mm sensors or Ø12-280mm liquid filled sensors with thread PG13.5 (pH-glass- and ISFET sensors, conductivity- or temperature sensors, turbidity and other optical sensors)
- Chemicals
- Water treatment
- Rough processes
- Requirement of automated sensor cleaning or calibration
-
Downloads
We are looking forward to hearing from you:
Exner Process Equipment GmbH
Carl-Metz-Straße 26
76275 Ettlingen
Deutschland
Telefon: +49 (0)7243-94 54 29-0
Fax: +49 (0)7243-94 54 29-99
E-Mail: sales@e-p-e.de
